Specialty Lubricants

Premium Quality Hydraulic Anti-Wear Series

Hydraulic Anti-Wear Series are premium quality anti-wear hydraulic fluids designed for use in hydraulic systems in industrial and mobile service where anti-wear properties are required.


More Details...

Gear MEP
High Performance Industrial Extreme Pressure Gear Oils

PETRONAS Gear MEP are high performance extreme pressure (EP) industrial gear oils specially formulated for the lubrication of industrial gears subjected to severe loads and shock loading services.


More Details...

PETRONAS JENTERAM G SERIES
Premium Performance Ashless Industrial Turbine Oil

PETRONAS Jenteram G Series are premium performance turbine oils specially developed for use in modern steam, light and heavy duty gas turbines, combined cycle turbines with or without associated gear boxes.


More Details...

Advanced Efficiency with Better Emission Control

PETRONAS Urania 3000 15W-40 is suitable for all types of heavy duty diesel applications including modern, high-output, low emission engines fitted with emission control system using EGR technology.


More Details...

Superior Engine Durability

PETRONAS Urania 800 15W-40 is formulated with ViscGuard™ to effectively guard against engine silent killers (engine deposits: soots, ash, deposits and varnish), preventing abrasive wear and oxidation to maintain optimal oil viscosity. This helps in extending engine life and reduces the total cost of ownership.


More Details...

Engine Durability

PETRONAS Urania 500 monograde series is formulated for older commercial vehicle diesel engines to help control against wear and control corrosion. This monograde series is suitable for older heavy duty diesel applications including turbocharged and naturally aspirated engines in both on and off highway applications.


More Details...

PETRONAS Grease Li EP 1, Li EP 2 and Li EP 3
Premium Industrial Extreme Pressure Lithium Greases

Petronas Grease Li EP 1, Li EP 2 and Li EP 3 are smooth textured, NLGI 1, 2 and 3 Lithium 12 hydroxystearate based greases which contain an EP (extreme pressure) additive, oxidation, rust, and corrosion inhibitors.


More Details...

Foodgrade Solvent Cleaner
This product is a high performance food grade solvent cleaner for oil, grease and other contaminants. The cleaner is rapid drying, without leaving any residues, provides limited sanitizing properties. Foodmax Clean S Spray is Kosher, HALAL and NSF-K1 approved.


More Details...

Vegetable based dough divider oil
Description
Foodmax DDO Spray is produced from ester based oil and special additives to warrant a trouble free and extremely clean operation when used as a dough divider oil. Consumption of Foodmax DDO Spray is about half to two times less than the conventional release agents found such as kitchen sunflower oil.


More Details...

Food grade dewatering and penetrating fluid
Foodmax DWF Spray is a food grade multi-purpose penetrating lubricant containing with excellent water displacing properties.


More Details...

Lubricating white oil for general purposes in a spray can
Description
Foodmax Easy Spray is a universal lubricant for use in food processing equipment where incidental contact with food may occur. Suitable for most applications where medium load is required. NSF H1& 3H approved.


More Details...

High Performance Foodgrade Universal High Temperature Fluid
This product is based on highly polar biodegradable ester base oil and is inhibited against oxidation to give a long wet film life at high temperatures.


More Details...

High performance food grade grease in spray cans
Description
Foodmax Grease Spray is a high performance food grade white grease, sticky and water/steam resistant. Suitable for open gears, slides, conveyors, bearings etc. Also suitable as assembly paste. Temperature range -40 to 180 ºC.


More Details...

Food grade spray grease based on calcium sulphonate technology
Description
Foodmax Grease CAS is a fully synthetic food grade spray grease based on calcium sulphonate. This technology is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear and excellent resistance to water and steam and corrosion.


More Details...

Direct Food Contact Grease, Release Agent & Lubricant
Description
Foodmax Inor 3H is a non-toxic lubricant designed for optimum lubrication and protection of seals, guides, bearings, blades, and other machinery operating in Food & Pharmaceutical Environments where Direct Food Contact is inevitable.


More Details...

Dry Lubricant Coating Containing PTFE
This product is suitable for applications in the food, pharmaceutical and other “clean” industries where wet and sticky lubricants cannot be accepted. Foodmax PTFE-C creates a hard-dry coating (paint like) after curing.


More Details...

Waxy film PTFE reinforced lubricant
Description
Foodmax TFD Spray is a clean, non-toxic and non-staining semi-dry PTFE based lubricant providing excellent low friction properties and reduces static. The water repellent film lubricates at low speeds and medium loads.


More Details...

Food grade high performance grease with high resistance to heavy loads and low speeds based on a PAO
Description
Foodmax Grease CAS S LS greases are member of a family of technologically advanced greases which have been developed by complexing modified overbased calcium sulphonates.


More Details...

Food grade assembly paste
White, non-toxic, grease-like compound with a high solids lubricant content designed for use as an assembly lubricant for lubricating bushes, sliding surfaces and small open plastic or metal gears and anti-seize compound for threaded fasteners.


More Details...

Food grade gear oil
Food grade range of lubricants for gears, bearings and transmissions. Foodmax Gear is a range of lubricants in which a combination of the latest base stock technology together with special additives has resulted in a very high performance. All base material used for the formulation is non-toxic and food grade.


More Details...

Synthetic and food grade gear oil
Range of fully synthetic food grade gear oils particularly suited for the lubrication of drive chains, conveyor chains, gearboxes and reduction units. Foodmax Gear PAO contains special additives that extend relubrication intervals. Foodmax Gear is NSF H1 registered for incidental food contact.


More Details...

Marine Lubricants

  • CYLINDER OILS
  • SYSTEM OILS
  • TRUNK PISTON ENGINE OILS
  • DIESEL ENGINE OILS
  • GEAR OILS
  • HYDRAULIC OILS (AW TYPE)
  • HYDRAULIC OILS (VI TYPE)

Kuala Lumpur: Bukit Bintang, Titiwangsa, Setiawangsa, Wangsa Maju, Batu, Kepong, Segambut, Lembah Pantai, Bandar Tun Razak, Cheras, Ampang,

More Details...


We create solutions that deliver benefits beyond equipment performance through operational efficiencies.

Discover

Contact Us

| Location

Penang Office
3B, Jalan Todak 5, Pusat Bandar Sunway,
13700 Seberang Jaya, Penang, Malaysia.

Kuala Lumpur Office
E-05-01, Starparc Point, Jalan Taman Ibu Kota,
Danau Kota, 53300 Kuala Lumpur, Malaysia.

| Phone
+604-380 1212

| Fax
+604-380 1211

| Email
info@apic.com.my